Calgary Forklift Training Course

Calgary Forklift Training Course - CSA and OSHA establish criteria for forklift safety training that meets current standards and regulations. Anyone planning to operate a forklift is required to successfully finish safety training prior to using any kind of forklift. The accredited Forklift Operator Training Program is designed to offer people training with the information and practical skills to become a forklift operator.

There are forklift operation safety rules which should be followed pertaining to pre-shift checks, and regulations for loading and lifting.

Prior to a shift starting, an inspection checklist must be completed and given to the Instructor or Supervisor. If any maintenance issue is discovered, the machine should not be utilized until the issue is addressed. To be able to indicate the machinery is out of order, the keys must be removed from the ignition and a warning tag placed in a location that is seen.

Loading safety regulations comprise checking the forklift nameplate's rating capacity and knowing if the weight of the load falls within capacity. The forklift forks must be in the downward position when the forklift is starting up. Keep in mind that there is a loss of around one hundred pounds carrying capacity for every inch further away from the carriage that the load is carried.

To be able to safely lift a palletized load, drive the forklift toward the pallet and halt with the fork three inches from the load. Level the mast until it is at right angles to the load. Lift the forks to an inch below the slot on the pallet and drive forward. After that lift forks four inches. Tilt back the load to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to warn other staff. Do not allow forks to drag on the ground.

Forklift loads must be loaded in such a way that they are secure and do not create a hazard to other objects or people. Restraining loads is required for materials that can shift during transport and destabilize the forklift.

In order to avoid the movement of drums, drums could be strapped together to decrease movement. Operators of forklifts must drive slowly when transporting liquids, to decrease instability in the forklift.

Click to Download the pdf