Calgary Boom Lift License

Calgary Boom Lift License - To be able to operate an aerial boom lift, operators must be licensed through training that could be obtained utilizing both practical training and classroom sessions and by obtaining a boom lift license. Instruction should be given with respect to the kind of aerial lift which would be used on the job. A License is needed for any person who works on or operates an aerial boom lift.

Different types of vehicle-mounted aerial devices consist of extensible boom platforms, aerial ladders, articulating boom platforms, vertical towers, and whatever combination of these types.

There are several basic safety rules that apply to all boom lifts. Worker safety whilst inside the basket is a top priority. Workers should put on a body harness and lanyard connected to the basket or boom. Never tie off to an adjacent pole, structure, or equipment. Workers should stand on the floor of the basket, and never climb or sit on the edge of the basket. The load restrictions of the manufacturer must be followed.

Aerial lift operators should be authorized to use the machinery. The operator must be familiar with all the aspects of the device and must have access to the manufacturers manual which must be kept in the lift. Operators are responsible for ensuring that safety procedures are followed in operating the lift. Testing lift controls on a daily basis should be carried out. Set brakes and position outriggers (if they are used) on a stable surface or on pads. If working on a slope, make use of wheel chocks.

Never move an aerial lift truck with an elevated boom while personnel are inside the basket. Articulating boom and extensible boom platforms utilized as personnel carriers must have accessible, plainly marked, upper controls. Except in emergency conditions, lower controls should not be utilized to override upper controls unless authorization has been given by the individual inside the lift.

Do not wear tree or pole climbers shall while working from an aerial lift.
Do not alter the insulated portion of the aerial lift.
Do inspect the booms to make sure that it is properly cradled and the outriggers are in the stowed position before moving.
When operating a boom lift next to power lines, make certain that the lines are di-electrically tested according to local regulations.

Click to Download the pdf