Calgary Forklift Training School

Calgary Forklift Training School - Forklift Training School And Reasons Why It Is Actually Vital - Industry and federal regulators have established the criteria for forklift safety training according to their existing standards and regulations. Individuals wishing to use a forklift should complete a forklift training School before working with one of these machines. The accredited Forklift Operator Training Program is designed to offer those training with the practical skills and knowledge to become an operator of a forklift.

There are forklift operation safety regulations which should be followed pertaining to pre-shift checks, and regulations for loading and lifting.

An inspection checklist must be carried out and submitted to the supervising authority prior to starting a shift. When a maintenance problem is uncovered, the use of the particular machinery must be stopped until the issue has been addressed. To be able to indicate the equipment is out of service, the keys should be removed from the ignition and a warning tag placed in a visible location.

Safety rules for loading will consist of checking the forklift's load rating capacity to know how much the machine could handle. When starting the machine, the forks should be in the down position. Don't forget that there is a loss of around one hundred pounds carrying capacity for every one inch further away from the carriage that the load is carried.

Lifting should start with the driver moving to a stopped position around three inches from the load. The mast should then be leveled until it has reached a right angle with the load. Raise the forks to one inch below the slot on the pallet and drive forward. After that lift forks four inches. Tilt back the load to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to alert other personnel. Do not allow forks to drag on the ground.

Click to Download the pdf